California Immobilizer car wheel boots THE ENFORCER 1

California Immobilizer car wheel boots “THE ENFORCER” are commercial grade car and truck wheel locks designed for the parking enforcement industry or as a long term vehicle storage security solution.

 

Our Enforcer model car wheel boots are a light weight, extremely tough commercial wheel boot solution designed primarily for campus parking enforcement. Our car wheel boots can be keyed alike by us prior to shipment. They are built tough out of high strength steel and bright yellow powder coated for visibility and durability. California Immobilizer car wheel boots are easy to install on all cars and truck and simple to remove by key holders – almost impossible to remove by anyone else!

 

Installing Enforcer Car Wheel Boots – The process for installing one of our car wheel boots is very simple. The locking arm swings up from a horizontal to a vertical position around the tire. The push lock then keeps the arm in position. The unit is fully adjustable to the tire width.

 

Our car wheel boots completely cover the lug nuts eliminating the possibility of tire removal. The frame acts as a chock that prevents the vehicle from moving even slightly forwards or backwards making even towing extremely difficult if not impossible. Our Enforcer car wheel boots feature a handy steel carry handle for ease of transport and feature multiple steel attachment points to the wheel which would require numerous cuts through heavy gauge steel if an attempt were made to physically cut the wheel boot off.

 

Our Enforcer car and truck wheel boots are supplied in three sizes to fit a wide variety of wheels. The Enforcer is measured by the overall width and height of the wheel. Wheel size is measured from ground to top of tire. Each model is adjustable within its size parameters, making The Enforcer very flexible to use on virtually all standard passenger type cars and trucks.

 

The Enforcer car wheel boots are available in 3 sizes:

 

Size one is used for wheel clamping low profile cars with a wheel size 18 – 24 inches with a wheel width up to 9 inches.

 

Size two is used for wheel clamping normal cars with a wheel size 20 – 27 inches with a wheel width up to 10.5 inches.

 

Size three is used for wheel clamping trucks with a wheel size of 26 – 35 inches with a wheel size of 8 to 14 inches.