MotoTote MTX3 m3 Deluxe Sport Motorcycle Carrier

Includes loading ramp!

The Moto-Tote m3 is the latest generation of our best selling motorcycle carrier for dirt bikes and scooters. Can also be used for light street bikes with rear tire width of 6 inches or less.

In addition to standard Moto-Tote features, such as:

Easy one-time assembly with minimal tools
Reverse (left or right) assembly
Zero-Wobble attachment to hitch

The m3 is our original motorcycle, moped, scooter, and dirt bike carrier. Built on a reliable 500 lb. rated platform, it securely hauls motorcycles with tire sizes up to 4.75" in the front and 6" in the rear with its angled steel tire tracks and innovative attachments. It attaches to any 2" receiver, transforming your car, truck, van, or RV into a motorcycle hauler.

The MTX m3 comes with these new features:

Loading ramp is included - Advanced formed tube and wire construction makes it light but extremely strong.

Modular design and assembly.

Premium grade hardware - Bolts are grade 8 capscrews (expensive) with nyloc nuts.

Aircraft inspired beam structure. The Moto-Tote MTX carriers are built on the MTX Platform which is a large diameter tube beam that provides structural support for all critical components of the motorcycle carrier. Everything is bolted to this platform: Tie-down arms, tire track, wheel chock assembly, etc. This construction provides superior strength and structural integrity.

Adjustable for wheelbases of 48 to 65 inches. During assembly, the wheel chock can be positioned forward or rearward to perfectly accommodate the size of your bike.

Adjustable for a wide range of tire sizes - From small scooter to large dirt bike. In addition to the forward/rearward positioning of the wheel chock, it can also be adjusted for front tire diameter.

Adjustable for distance from bumper - Put it as close to the bumper as you need to. Got a spare tire on the rear of your SUV? No Problem!

Your bike stays upright during loading until tie-downs can be attached. This saves you from trying to hold the bike up while fumbling with tie-downs.

Premium grade black polyester powder-coat finish

Superior design makes it stronger but lighter

Versatility - The MTX m3 is built on the exclusive MTX Platform which is designed to accommodate interchangeable attachments

1. MTX Platform

Heavy-duty steel main support connects to 2" receivers, hauls up to 500 lbs. (227 kgs.), supports track/chock adjustability, and the attachment of innovative components.

2. EasyLoad Ramp

A longer webbed steel ramp reduces angle, maximizes traction, and eliminates bottoming out at the top of the ramp. Ramp hooks directly into tire track and will not disengage during loading.

3. Angled Steel Track

Angled track with advanced geometry secures rear tire sizes up to 6" (152 mm) wide and adjusts up to 65" (165 cm) wheelbases.

4. ZeroWobble Hitch Mount

Innovative bolt and nut assembly eliminate rack movement laterally in transport.

5. StableStop Chock

Adjustable front tire mount secures tires up to 4.75" (120 mm), adds lateral support, and holds the bike upright while securing tie-downs.

6. BroadPull Arms

Wide tie-down arms optimize strap angles and improve lateral support.

Last but not least - It looks REALLY cool...