Key Features
- Includes 4 in bumper Sensors pre-installed on half license plate frame, which allows for east non- permanent
- Will audibly alert driver if object is behind vehicle within 8
- As driver moves closer to objects the frequency of the audible alert increases
- Can add optional LED display that will inform driver numerically by feet
Capabilities
With this system, you'll know automatically without checking a monitor that there is an obstacle behind your car. The parking sensors send a message to the controller, which sounds the buzzer to alert you of something behind your vehicle. You can also add an optional display component to this system.
How It Works
Whenever you put your car in reverse, the 4 parking sensors on the back bumper will bounce ultrasonic waves off any obstacles behind your vehicle. If waves are detected bouncing back, the controller receives that message and it sounds the buzzer. Buzzer can be muted if you towing or pulling a trailer, boat, or RV. When obstacles are further away, the system makes intermittent beeps. The beeps become more frequent as you move closer to the object, and finally, when you are only 1 foot away from it, a continuous alarm sounds. System is only active when your car is in reverse gear.
Specifications
1. Operating voltage: DC 12 V
2. Power consumption: 3.5 W
3. Operating temperature: -20 degrees C to +60 degrees C
4. Detection distance: 1 to 6 feet
INCLUDED IN PACKAGE
(4) sensors pre-installed on black plastic half license plate frame with 14’ cable
Controller unit/computer (non-waterproof)
Alarm/Buzzer with 12’ cable
Drill bit
Owner’s manual/installation instructions
Can add an optional LED display for $20.00 with 12’ cable
Possible Applications
Car Safety
Truck Safety
Vehicle Safety
Backup Camera
RV Backup Camera
Vehicle Camera
Car Backup Camera
Car Camera
Accident Prevention
Light Duty Pickup, Medium Duty
Car reversing sensor
Backing Safety
